KA-3 120in Wingspan ARF

  Click On Images to Enlarge

Overview

The KA-3 and its predecessor the KA-1 were mostly sold as kits for home assembly. Apart from their fuselages the two types are very close in appearance, simplicity, weight and performance. They share a round tipped high wing with constant chord and no sweep, mounted with 2.5° of dihedral and braced with a single lift strut on each side from the lower fuselage to the wing at about one third span. Plain, constant-chord lt ailerons reach almost from the tips to about mid span and upper wing spoilers are placed at mid chord, inboard of the ailerons. Both have 37° butterfly tails with straight leading edges and round tips and trailing edges.

Features

• All Balsa and lite-ply construction
• Fully covered in weathered detail
• Control surfaces pre-hinged and installed
• Two piece wing with aluminium wing joiner
• Big battery hatch for Electric version
• Electric Motor mount
• Cover by Oratex

Includes

• Assembly instructions with stage-by-stage illustrations - [ Download ]
• Electric motor mount
• Aluminium wing joiner
• Decals and all hardware

Required Hardware (Not Supplied)

• Transmitter, Receiver, Motor, Servos, Battery, Extension Leads, Glue, Tools.

Recommended Hardware (Not Supplied)

• Electric Motor & ESC - TBC
• Servos - TBC

Specifications:

Wingspan:	120in (3050mm)
Fuselage Length:	65.94in (1675mm)
Weight (Ready to fly):	3.5kg (Will vary depending on equipment used)
Electric Motor:	TBC
Radio:	5-7 channels with 4-5 servos