Secraft V1 1.0 Inch (M2) Servo Arm

  Click On Images to Enlarge

Overview

Material: aluminium 6061-T6 (anodised)

JR:23T(Gold), Hitec:24T(Blue), Futaba:25T(Red)

Length: 1.0 Inch (25.4mm)

Fixing screw bolt is M2

Weight: 2g

1 Per package

Bolt is not included

Installation Guide

• Follow aircraft manufactures recommendation for Servo control horn set up.
• Loctite all servo screws.
• Install ball link on bottom of servo arm (where possible).
• Keep all linkage tight.
• Servo arms longer than what is recommended can cause.

The Hitec 8XXX series servos must use Futaba type.