Pilot-RC 90in Wingspan Sbach 342 V2
Buy on Hobbyplastic.co.uk
Find Your Local MacGregor Stockist
Click On Images to Enlarge (Please note photos shown are for colour scheme puropses only - actual model may vary)
Overview
Introducing the NEW Pilot RC Sbach 342 V2 90in
The next-generation Sbach 342 is here, This V2 design masterfully combines the legendary smoothness of the original 87in Sbach with unmatched, modern Xtreme Aerobatics (XA) precision.
Constructed with a full airframe of new plywood, composite fibreglass, and carbon fibre consistent with our current 3D aircraft it is built for performance. After extensive testing and design refinements, we have perfected its flight characteristics.
Specifications:
| Model: | Sbach 342 V2 |
|---|---|
| Wingspan: | 90.2in (2.294m) |
| Length: | 89in (2.262m) with 4.5in spinner |
| Wing area: | 1,540sq in (9,940sq cm) |
| Weight: | 19.1lbs (8.7kg) with DA70 and stock muffler |
Video:
"Spare" transparent cowl for easy markings
NEW! 2025 quick assembly system for Stabiliser - no tools required
Features:
- Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
- Patented quick assembly system for wings.
- NEW! 2024 quick assembly system for Stabiliser no need tools anymore.
- Patented quick assembly system for canopy.
- NEW! Canopy pin more reliable fix it by Screw and New Material hole to stop vibration.
- Film covering applied over a Genuine German Oracover (Ultracote) base.
- Highly prefabricated, experienced builders can have air ready in under a day.
- Pre-installed hinges (glued and pinned).
- Internally mounted cowling – so no visible external screws exposed.
- Removable wings and stabs.
- Laser engraved motor mounting position.
- Easy canister installation due to open construction.
- Pull push system for Rudder servo.
- Removable landing gear separate left and right side.
Included Hardware:
- Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants).
- "Spare" lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time.
- Pre-installed hinges and pre-mounted canopy.
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve.
- Wheels, axles and wheel pants.
- Pre-prepared pushrods with ball links.
- Matching plain colour 4.5in carbon spinner.
- Special colour spinner available separately.
Crash Kits Available For This Model:
- Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
- Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model.
- Please note that additional or alternative spare wood outside of the above Packs is not available to order.
Images for illustration purposes only – exact contents vary per package, model and size.
Required Hardware (Not Supplied):
Motor: 60-76cc or equivalent electric
Servos: 5 high torque plus throttle // Uses x1 per aileron, x1 per elevator half and x1 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Recommended Hardware (Not Supplied):
- Servos: Pilot-RC PW-37AH 37.8kg.cm/0.07s HV Brushless Servo or MacGregor MGB8346HV 38.0kg/0.10s Brushless High Voltage Servo
- Servo arms: Pilot-RC 1.6in Aluminium arms (included with Pilot-RC servos) - PIL302
- Wingbags: Pilot-RC 60cc Wingbags
Build information
Cowl Size:
A: 324mm, B: 325mm, C: 310mm, D: 325mm
Extension Wire Lengths:
Throttle: 25cm
Each aileron: 25cm (to reach receiver direct)
(nearest servo and furthest servo – to reach receiver direct)
Each elevator: 125cm
Rudder: 125cm
Centre Of Gravity:
167mm - Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Centre of Gravity.
Order Code: PIL917/918
Manufactured By Pilot-RC
Manuals/Downloads