Pilot-RC 103in Wingspan Laser V3
Buy on Hobbyplastic.co.uk
Find Your Local MacGregor Stockist
Click On Images to Enlarge
Overview
Time for a change! Pilot-RC has broken all the molds with this one.
The Laser has been fully designed from the ground up for out and out performance, keeping in line with current demand for faster, more aggressive and more agile models, while still keeping the well know great flying characteristics Pilot-RC models are known for.
You really need to see the videos of this model in action to understand its capability. In this case, its not a question of if the plane is quick enough, its whether you can keep up!
In 2023 we proud to present NEW LASER V3 103in
Pilot-RC are non-stop development get feedback and listen from everyone both high level pilot and normal level pilot, for balance charactoristic of performance on this airframe, we upgrade everything even better aerodynamic shape of plane and new canopy look more modern shape as I say it is V3 and new wing design for roll more smooth more precise and still agile. also upgrade some structure for more lighter and improve quick release wing,canopy,and stabilizer for more convenient and reliable.
Specifications:
| Model: | Laser – 35% |
|---|---|
| Wingspan: | 102.5in (2.603mm) |
| Length: | 93.7in (2.380mm) |
| Wing area: | 1,771sq in (11,430sq cm) |
| Weight: | 26.35lbs (11.95kg) |
Video
LASER V3 103in in the hand of RYU SINTUPHROM with his colour scheme.
Gallery
Features:
- NEW - Full Carbon reinforced fuselage and wing using carbon laminated wood.
- Genuine German Oracover (Ultracote) covering
- Highly prefabricated, experienced builders can have air ready in under a day
- Pre-installed hinges (glued and pinned)
- Internally mounted cowling – so no external screws exposed
- Includes cooling baffles
- Easy canister installation due to open construction
- Removable rudder (as well as removable wings and stabs)
- Laser engraved motor mounting position
- Push-Pull system for Rudder servos
Included Hardware:
- Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
- Pre-installed hinges and pre-mounted canopy
- Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Wheels, axels and wheel pants
- Pre-prepared pull-pull wires and pushrods with ball links
- Matching 5in carbon spinner
Crash Kits Available For This Model:
- Landing gear repair package. Includes the wooden parts required to repair the damage often suffered around the landing gear area.
- Front fuselage repair package. Includes the wooden parts required to repair the damage often suffered around the front of the model
Please note that additional or alternative spare wood outside of the above Packs is not available to order.
Required Hardware (Not Supplied):
Motor: 100-130cc or equivalent electric
Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Recommended Hardware (Not Supplied):
- Engine: DLE111 2-Stroke, DLE120 2-Stroke, Saito FG-100TS 4-Stroke or electric equivalent
- Servos: MG7232HV 31.5Kg.cm/0.09s High Voltage Servo or MGB6928HV 28Kg/0.06s Brushless High Voltage Servo
- Servo Arms: Pilot-RC 1.6in Aluminium arms - PIL302
- Wingbags: Pilot-RC 100cc Wingbags - PIL064
Build information
Cowl Size
A: 335mm – B: 330mm – C: 307mm – D: 348mm
Exhaust Tunnel Size
A: 603mm – B: 103mm – C: Unlimited – D: 131mm – E: 172mm – F: 192mm
Due to the open tunnel design in the Laser, there is no backplate (measurement C) so there is no limit to the length of exhaust that can be used.
Rudder Horns and Pull Pull Location
A: 31mm – B: 55mm – C: 60mm – D: n/a – E: 8.5mm
Servo Extension Lengths
Throttle: 40cm
Each aileron: 25cm + 75cm (nearest servo and furthest servo – to reach receiver direct)
Each elevator: 150cm
Rudder: 140cm (when using direct – if installing pull pull, no required extension)
Centre of Gravity
194mm - Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.
Order Code: PIL730
Manufactured By Pilot-RC
Manuals/Downloads