Pilot-RC Extra NG 115in (2.92m) Wingspan

  Click On Images to Enlarge

Overview

A brand new design, built from a classic. In 2019 Extra Acrobatic Aircraft unveiled their latest masterpiece, and now in 2020 Pilot-RC is unveiling theirs.

The Extra NG is the latest iteration of the Extra family, each version becoming more precise and more agile than ever before, and this feeds down all the way through our models.

This new design, combined with all of Pilot-RC's latest build innovations and methods provide a high quality kit that can be built within minutes upon arrival at the flying field and relied upon for strength, agility and all round fun.

Specifications:

Model:	Extra NG
Wingspan:	115in (2.92m)
Length:	107.5in (2.730m)
Wing area:	2,182sq in (14,082sq cm)
Weight:	38.2lbs (17.4kg)

Features:

• NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
• NEW! Patented quick assembly system for wings and stabiliser
• NEW! Patented quick assembly system for canopy.
• Film covering applied over a Genuine German Oracover (Ultracote) base
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and sealed)
• Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
• Removable wings and stabs
• Laser engraved motor mounting position
• Easy canister/tuned pipe installation due to open construction
• Pull push system for Rudder servo

Included Hardware:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• 'Spare' lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pushrods with ball links
• Matching carbon spinner

Required Hardware:

Motor: 150-180cc or equivalent electric

Servos: 8 high torque plus throttle // Uses x2 per aileron, x1 per elevator half and x1 or x2 on rudder using push-pull

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Recommended Hardware:

• Servos: MacGregor MGB8555HV 54.7Kg/0.12s Brushless High Voltage Servo
• Servo arms: Pilot-RC 1.6in Aluminium arms (PIL302)
• Engine: DLE-170 Two-Stroke Petrol Engine
• Wingbags: Pilot-RC Wing Bag for 150cc Aerobatic Plane
• Suncover: Pilot-RC Suncover for 170cc Aerobatic Plane

 

Video

Gallery

Build Information

Cowl Size

A: 378mm - B: 368mm - C: 358mm - D: 3732mm

Exhaust Tunnel Size

A: 812mm - B: 123mm - C: 812mm - D: 133mm - E: 200mm - F: 209mm

Rudder Horns and Pull Pull Location

A: N/A - B: N/A - C: N/A - D: 93mm - E: 8.5mm

Servo Extension Lengths

• Throttle: 45cm
• Each wing: Inside aileron 30cm, Outside aileron 90cm
• Each elevator: 155cm
• Each rudder servo: 155cm

Centre of Gravity

215mm - Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

Manuals/Downloads

• Coming Soon..........