Pilot-RC Predator 1.8m (70in) Composite Jet
Click On Images to Enlarge
Overview
Features:
- Full composite wing and elevator with fibreglass fuselage
- Two piece wing and two piece stabiliser all for easy transport
- Painted outside the mold so no seam lines
- Pre-installed tubes for included servo extension leads
- Pre-installed fibreglass control horns
Description
A whole new line of sport jet, designed from the ground up with performance in mind. Capable of both high and low speed flying and manouvers and even options for converting to full 3D no manouver is out of reach for the Predator.
Select one of the several aggressive colour schemes and really stand out from the crowd at your next event.
Included Hardware
- Complete air frame (including aluminium wing-tubes)
- Pilot-RC electric retracts and electric brakes
- Servo extension leads
- Dual wall tail pipe (for 45-85N turbines)
- 2,000ml fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
- Plastic air trap UAT
- Pre-prepared pushrods with ball links
*Also available: Turbine Ready version. Includes all the above, plus x8 Pilot-RC servos, all pre-installed. Just add your own turbine of choice.
Required Hardware
Turbine: 45-85N (4.5 - 8.5kg thrust)
Servos: 8 x MacGregor MG2810HV 10.0Kg/0.07s High Voltage Servo (Uses x1 per aileron, x1 per flap, x1 per elevator, x1 on rudder and x1 for steering)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Specifications
Wingspan: | 63in (1.6m) |
---|---|
Wing Area: | 832 sq in (5370sq cm) |
Fuselage length: | 70in (1.8m) |
Weight: | 7.4kg (16.28lbs) dry weight without fuel |
Engine: | 4.5 - 8.5kg thrust turbine |
Video
Schemes List
Scheme 17
![Pilot-RC logo](../images/PILOTRC-info-page-marker.png)
Order Code: PIL510
Manufactured By Pilot-RC
Manuals/Downloads