Pilot-RC Viperjet 2.2m Wingspan Composite Jet Jet
- Full Composite Construction
- Aluminium Tube for Wings/Stabliser Spar
- Two Piece Wing/Stabliser
- External Painted Scheme
- Removable Wing/Stabliser/Vertical Fin
- Fuel Tank and Fuel Tube Included
- Pre-Installed Gear Door
- Hardware Included
- Dual Wall Tail Pipe for 8-14Kg Turbine Included
- Scale Cockpit (Without Pilot)
- High Quality Air Trap (UAT) Included
- Fuel Dot and Fuel Tank Vent with Start up Overflow Fitting Included
- One Servo for Each Flap, One Servo for Each Aileron, One Servo for Rudder, One Servo for Each Elevator, One Servo for Nose Wheel. Use Standard Size Servos
- Three Servos for Gear Door. Use Medium Size Servo
- Turbine Ready Version Include: Airframe with Tail Pipe, Air Trap, Electric Retract Landing Gear with Brake, 8pcs of Pilot-RC PY-20AL or PW-20AH Servos, Servo Extension Lead, Navigation Light System all pre-installed at the factory plus free wing bags.
Aileron: 20mm, Rudder: 25mm, Elevator: 20mm, Flap: 35mm for Take Off and 65mm for Landing.
The CG is 158mm from the front leading edge on the root of the wing.
|Fuselage Length:||78.7in (2.0M)|
|Engine:||8-14Kg Thrust Turbine|
|Scheme No.||Scheme Name|