Dualsky VR-3 (UBEC) 3A Switching Mode Voltage Regulator

  Click On Images to Enlarge

Overview

The VR-3 is a switch-mode DC regulator separated from ESC, it will take high-voltage (5.5V-23V) power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servos. The VR-3 allows you to easily choose whether to run your system at 5 or 6 volts. Running at 6 volts gives faster servo speed, and most modern receivers and servos will work fine at this voltage.

Features

• VR-3 is an advanced switching regulator, provides over-current and over-heat protection function, and the switching frequency is 300KHz.The max efficiency of this chip is 92%.
• The smallest size and the lightest weight.
• Compare linear BEC with switch-mode BEC: When using a lithium battery pack more than 3s, a switch-mode BEC has much higher efficiency than linear BEC.
• Reverse polarity protection at input is provided.

Specifications

Dimensions:	21.5 x 15.5 x 13.5mm
Output:	5V/3A or 6V/3A, MAX. 5A(10% Duty)
Ripple:	<50mVp-p(@2A/12V)
Input:	5.5V-23V (2-5s lithium battery pack, 5-15cells NiMh / NiCd battery pack)
Weight:	10g (Including cables)
Idle power consumption:	< 10 ma from battery
Connections:	Red/black 24 ga. Wire pair for main power in, 24 ga. red/black Servo lead out to Rx, JR style
Controls:	Jumper selects 6v or 5v output
Indicators:	green LED shows power ON
Installation:	recommend mounting in airflow to improve reliability and efficiency

Manuals/Downloads

• Dualsky VR-3 (UBEC) Switch Mode Regulator Manual