Pilot-RC Extra NG 103in (2.63m) Wingspan

  Click On Images to Enlarge

Overview

A brand new design, built from a classic. In 2019 Extra Acrobatic Aircraft unveiled their latest masterpiece, and now in 2020 Pilot-RC is unveiling theirs.

The Extra NG is the latest iteration of the Extra family, each version becoming more precise and more agile than ever before, and this feeds down all the way through our models.

This new design, combined with all of Pilot-RC's latest build innovations and methods provide a high quality kit that can be built within minutes upon arrival at the flying field and relied upon for strength, agility and all round fun.

Specifications:

Model:	Extra NG
Wingspan:	103in (2.63m)
Length:	97.2in (2.47m)
Wing area:	1,843sq in (11,890sq cm)
Weight:	27.72lbs (12.6kg)

Features:

• NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
• NEW! Patented quick assembly system for wings, stabilizer and SFG
• NEW! Patented quick assembly system for canopy.
• Film covering applied over a Genuine German Oracover (Ultracote) base
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed hinges (glued and pinned)
• Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
• Removable wings and stabs
• Laser engraved motor mounting position
• Easy canister installation due to open construction
• Pull push system for Rudder servo

Included Hardware:

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
• "Spare" lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time (See pictures below)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pushrods with ball links
• Matching carbon spinner

Required Hardware:

Motor: 80-120cc or equivalent electric

Servos: 7 high torque plus throttle // Uses x2 per aileron, x1 per elevator half and x1 or x2 on rudder using push-pull

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Recommended Hardware:

• Servos Option 1: 7 x MG7232HV 31.5Kg.cm/0.09s High Voltage Servos plus 1 x MacGregor MG5921HV 20.3Kg.cm/0.12s High Voltage Servo
• Servos Option 2: 7 x MGB6928HV 28Kg/0.06s Brushless High Voltage Servo plus 1 x MacGregor MG5921HV 20.3Kg.cm/0.12s High Voltage Servo
• Engine: DLE-111 Twin 2-Stroke Petrol Engine or DLE-120 Twin 2-Stroke Petrol Engine or Saito FG-100TS Twin 4-Stroke Engine
• Wingbags: Pilot-RC Wing Bag for 100cc Aerobatic Plane

Video

Pilot-RC 103in Extra-NG

Gallery

Schemes List and Replacement Covering Numbers

Our Order Code	Colour Scheme No	Oracover Covering No	Ultracote Covering No
PIL659	Extra NG 01 (Red/Blue/White)	21-010 21-023 Metal Blue	HANU870 HANU866 Metal Blue
PIL660	Extra NG 02 (Green/Black/White)	21-010 21-043 Carbon Fibre effect	HANU870 HANU903 Carbon Fibre effect

Build Information

Extra NG 103in Online Build Manual

Cowl Size

A: 342mm - B: 326mm - C: 319mm - D: 322mm

Exhaust Tunnel Size

A: 974mm - B: 112mm - C: 974mm - D: 118mm - E: 172mm - F: 184mm

Rudder Horns and Pull Pull Location

A: 49mm - B: 47mm - C: N/A - D: 86mm - E: 8.5mm

Servo Extension Lengths

• Throttle: 25cm
• Each wing: Inside aileron 30cm, Outside aileron 100cm (to reach receiver direct)
• Each elevator: 136cm
• Each rudder servo: 136cm

Centre of Gravity

225mm - Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

Manuals/Downloads

• Pilot-RC Extra NG 103in Online Manual