IISI-RC EXP-ACC-3D G-Acceleration Sensor
EXP Expanders are connected to the IISI-Link and do not operate stand-alone. Multiple expanders can be connected to the IISI-Link using a Y cable.
The EXP-ACC-3D measure g-acceleration in all 3 dimensions (X,Y,Z). It detects acceleration up to +/- 24g and is based on a MEMS sensor.
Install the EXP-ACC flat in your model, so that the plane on the EXP-ACC-3D represents your model, seen from the top.
- Up to +/-24g, 3 axis
- Resolution 0.1g
- Sampling frequency 100Hz
- Detects and indicates vibration
- Firmware upgradable through Cockpit
- Size: 20 x 14 x 4mm
- Weight: 2.5g
Please Note: Needs Cockpit Software V1.11 or later
Order Code: IISI-EXP-ACC3D
Manufactured By IISI-RC